INTRODUCING A NEW PRODUCT KIT
WE HAVE BEEN DEVELOPING AT OUR NEW STORE FOR
WELL OVER ONE YEAR.

WE ARE VERY EXCITED OVER THE RESULTS OF OUR MANY TESTS WITH THE EXACT TWO
CLEANERS AND RUBBER RESTORATION PRODUCT YOU WILL RECEIVE IN THIS KIT.

YOUR KIT COMES WITH A FULL SATISFACTION GUARANTEE, IF IT DOES NOT LIVE UP TO
AND EXCEED OUR DESCRIBED RESULTS ON YOUR DECK'S DIRTY OR OXIDIZED RUBBER
PINCH ROLLERS, BELTS AND REEL HOLD DOWNS. PLEASE SEND THE UNUSED PORTION
BACK TO US AND WE BUY IT BACK FROM YOU FOR YOUR PURCHASED PRICE.

THIS KIT CAN, AND WILL IN MOST CASES, PAY FOR IT'S SELF WITH JUST ONE USE ON
YOUR DECKS MAIN CAPSTAN BELT, PINCH ROLLER OR RUBBER REEL HOLD DOWNS
SEPARATELY.

THIS KIT IS A MUST HAVE FOR ALL THE SINGLE VINTAGE REEL TO REEL DECK OWNERS,
AND THE MULTI-DECK COLLECTORS, RIGHT DOWN TO ALL YOU GOOD FOLKS OUT
THERE SPENDING THE MANY HOURS REPAIRING AND REFURBISHING THESE WONDERFUL
WORKS OF ENGINEERING ART FOR RESALE.

THE MOST FANTASTIC THING ABOUT THIS RUBBER REJUVENATION KIT IS SOMETHING
MONEY CAN'T BUY, YOUR TIME AND FRUSTRATION!

WE WILL EXPLAIN:

IF YOUR DECK'S MAIN CAPSTAN BELT IS SLIPPING, CAUSING YOUR DECK'S "WOW" TO GO
IN AND OUT, WHAT DO YOU DO? YOU MAY FIRST GO ON LINE AND HOPEFULLY EMAIL US
FOR A REPLACEMENT BELT FOR YOUR DECK. A BELT REPLACEMENT WILL COST YOU
FROM $15.95, ALL THE WAY TO $19.95. WHEN THE BELT COMES IN YOU THEN HAVE TO
FIGURE OUT HOW TO REPLACE YOUR BELT. IF YOU HAVEN'T PREFORMED THIS TASK
BEFORE ON YOUR OWN DECK, YOU MIGHT NEED TO PURCHASE A SERVICE MANUAL
THAT WILL SHOW THE COMPONENTS YOU MUST TEAR DOWN. THERE GOES ANOTHER 15
TO 25 BUCKS, BUT THAT'S NOTHING TO WHATS AHEAD OF YOU NEXT. FOR A FIRST
TIMER TO REPLACE A DECK BELT IT IS NO EXAGGERATION TO STATE IT WILL TAKE 2 TO
4 HOURS MINIMUM.

SO LET'S EXPLAIN THE ALTERNATIVE WE ARE OFFERING WITH THIS KIT.

WHAT IF YOU COULD JUST REMOVE YOUR DECKS BACK PANEL AND IN AN EASY TWO
PART PROCESS, CLEAN AND REJUVENATE THAT SLIPPING BELT, SNAPPING IT BACK, VERY
CLOSE TO NEW.

* * * * *

WITHOUT REMOVING YOUR BELT FROM YOUR DECK!

* * * * * * *

WE OFFER AN ALTERNATIVE THAT WILL TAKE APPROXIMATELY 20 MIN. TO 1 HOUR,
WITHOUT EVER HAVING TO REMOVE THE BELT. WE HAVE APPLIED THIS PROCESS TO
OVER 50 DIFFERENT DECK MODELS IN OUR STORE, FOR OVER ONE YEAR OF TESTING. IN
WELL OVER 90% OF OUR TEST CASES, WHERE THE BELT WAS INTACT AND DRIVING THE
CAPSTAN FLYWHEEL FROM SLIPPING TO COMPLETELY NOT TURNING, THIS PROCESS
PREFORMED FLAWLESSLY. OUR PROCESS MADE OUR TEST BELTS GRIP AND BECOME
SUPPLE AGAIN.

THE PROCESS:

USING THE KIT'S COTTON SWABS, DIP ONE END INTO THE PRE-CLEANER. APPLY CLEANER
AND WORK INTO THE EXPOSED PORTION OF THE BELT THAT IS NOT ENGAGED TO THE
FLYWHEEL OR OVER THE CAPSTAN MOTOR PULLEY. USE THE DRY END OF THE SWAB TO
DRY AND PULL OFF ANY RESIDUAL DEBRIS STILL ON ALL FOUR SIDES OF THE BELT.

ONCE THE CLEANER IS DRY REPEAT THE SAME PROCESS WITH A NEW SWAB AND THE
RUBBER RESTORE. USING THE DRY END, SWAB UNTIL YOU NO LONGER SEE ANY
RESIDUAL DEBRIS OR BROWN SUBSTANCE COMING OFF THE BELT AND ONTO THE SWAB.

NEXT YOU WILL REPOSITION YOUR BELT, USING THE CAPSTAN SHAFT OR CAPSTAN
MOTOR FAN ON THE REAR OF THE MOTOR TO EXPOSE ANOTHER AREA. REPEAT THE
ABOVE PROCESS UNTIL THE ENTIRE BELT HAS BEEN CLEANED AND REJUVENATED.

WE HAVE PREFORMED THIS "ON DECK" BELT RESTORE PROCESS ON EVERY BRAND AND
MODEL OF DECK THAT HAS COME THRU OUR STORE OVER THE PAST YEAR WITH OUR
TECH DEPARTMENT.

WE WERE ABLE TO RESURRECT 90% OF THE INTACT BELTS WE CAME ACROSS IN THESE
DECKS.

THE 10% OF BELTS THIS KIT WILL NOT REFURBISH:

THIS KIT WILL NOT REFURBISH BELTS THAT ARE STICKY LIKE TAR TO THE TOUCH OR
HAVE CRACKS. PLEASE NOTE THIS WHEN YOU ARE INSPECTING YOU PRESENT DECK'S
BELT.

ATTENTION PIONEER RT-909 AND RT-707 DECK OWNERS!

THIS PRODUCT WILL NOT, LET US REPEAT, WILL NOT, RESTORE YOUR DECK'S ORIGINAL
FACTORY CAPSTAN PINCH ROLLERS OR ORIGINAL FACTORY MANUFACTURED BELTS
THAT CAME WITH YOUR DECK NEW. IF, LIKE IN MOST CASES ON YOUR DECK, THEY ARE
BECOMING GUMMY AND STICKY, ONLY NEW REPLACEMENT PARTS WITH CURRENT
MANUFACTURED RUBBER COMPOSITIONS WILL SOLVE YOUR PROBLEM. IF YOU ARE
CERTAIN YOUR PINCH ROLLERS AND BELT ARE SOMEWHAT CURRENT REPLACEMENTS
AND NOT THE ORIGINALS, THEN THIS PRODUCTS WILL PERFORM AS DESCRIBED ON
YOUR DECK.

SO THAT COVERS THE BELTS.

LET'S TELL YOU ABOUT ANOTHER EVEN MORE RARE AND EXPENSIVE RUBBER
REPLACEMENT PART ON YOUR DECK.

PINCH ROLLERS:

A DAY DOES NOT GO BY AT OUR STORE WHEN WE DO NOT GET 2-3 EMAIL OR PHONE
CALL REQUEST FOR REPLACEMENT PINCH ROLLERS THAT WE ARE EITHER SOLD OUT OF
OUR STOCK OR ARE SO RARE WE CAN NO LONGER LOCATE THEM TO SELL NEW. IN OUR
RESEARCH DURING THESE CORRESPONDENCES WE HAVE DETERMINED THAT AT LEAST
60% OF THESE REQUESTS ARE TO REPLACE A PRESENT PINCH ROLLER THAT OUR KIT
COULD MAKE LIKE BRAND NEW WITHOUT REPLACING THE ROLLER.

THE PROCESS TO CLEAN AND REJUVENATE PINCH ROLLERS TAKES JUST 10 MIN. WE
PROMISE THAT THIS PROCESS WILL BRING A SMILE TO YOUR FACE IF NOT POP YOUR
EYES OUT WHEN YOU SEE AND FEEL THE DIFFERENCE OF YOUR PINCH ROLLER BEFORE
THEN AFTER.

JUST ONE COTTON SWAB TIP DIPPED INTO OUR PRE-CLEANER AND APPLY THE CLEANER
OVER THE ENTIRE ROLLER, WORK IT IN, THEN DRY. NEXT TAKE ONE SWAB TIP DIPPED
INTO OUR RUBBER RESTORE BOTTLE AND WORK IT IN, THEN DRY. FINISH OFF WITH
RUBBING THE ROLLERS OUTER CIRCUMFERENCE ON OUR SPECIAL, KIT PROVIDED,
CHAMOIS CLOTH AND YOU HAVE A PINCH ROLLER THAT LOOKS AND PERFORMS LIKE
BRAND NEW IN 95% OF OUR TEST DECKS.

PLEASE NOTE:

IF YOUR PINCH ROLLER HAS WHAT'S CALLED "CAPSTAN BURN", THAT IS WHERE YOUR
PINCH ROLLER HAS ROUNDED DEBITS ACROSS THE OUTER FACE. THIS WAS CAUSED
DURING YOUR DECK'S LIFE, WHEN EITHER YOUR TAPE TRANSPORT MECHANISM OR
YOUR PINCH ROLLER ITSELF FROZE WHILE YOUR PINCH ROLLER WAS ENGAGED AND
YOUR CAPSTAN WAS STILL SPINNING FOR ANY LENGTH OF TIME. THUS YOUR CAPSTAN
SHAFT BURNED OR RUBBED A DEBIT INTO YOUR PINCH ROLLER. NEEDLESS TO SAY OUR
KIT'S PRODUCTS WILL NOT ALLEVIATE THIS PROBLEM WITH YOUR PINCH ROLLER. IT CAN
NOT GROW BACK RUBBER THAT HAS BEEN WORN AWAY.

NEXT LET US TELL YOU ABOUT A DECK COMPONENT THAT IS THE RAREST TO REPLACE
WITH A NEW ORIGINAL THAT THIS KIT WILL WORK WONDERS ON.

ORIGINAL RUBBER REEL HOLD DOWNS:

IF YOU HAVE A VINTAGE DECK THAT USES RUBBER REEL HOLD DOWNS THEN YOU KNOW
THAT THE 25 YEARS TO 40 YEARS SINCE THEY WERE MANUFACTURED HAS MADE THEM
HARD AND IN MOST CASES USELESS TO THERE ORIGINAL PURPOSE. THEY
FRUSTRATINGLY FALL RIGHT OFF YOUR DECK'S REEL TABLE SHAFT. THEY HAVE A HARD
TIME HOLDING ON THEMSELVES MUCH LESS A SPINNING REEL WITH YOUR DECK IN A
VERTICAL POSITION.

THIS WAS THE PART OF OUR DECK TESTS WITH THIS KIT THAT WAS THE MOST EXCITING.

BY NOT ONLY CLEANING AND REJUVENATING THE OUTSIDE OF THESE RUBBER HOLD
DOWNS BUT MOST IMPORTANTLY CLEANING AND REJUVENATING THE HOLE IN THE
HOLDERS THAT CAPTURES YOUR REEL TABLE SHAFT, THEY GRIPPED LIKE NEW AGAIN IN
80% OF OUR 50 PAIR TEST WITH THIS KIT.

IF THERE ARE NO CRACKS AND THEY ARE JUST STIFF AND OXIDIZED WAIT AND SEE
WHAT THIS STUFF WILL DO TO THEM!

THAT COVERS THE 3 MAJOR USUAL REPLACEMENT PARTS THIS KIT REJUVENATION WILL
MORE THAN PAY FOR IT'S SELF WITH THE FIRST USE ON YOUR DECK.

NOW EVEN IF THIS KIT WOULD DO JUST THAT ONE DECK IT STILL WOULD BE A BARGAIN
PRICE FOR THE LABOR AND FRUSTRATION TIME IT WOULD ELEVATE.

BUT TRY ENOUGH PRE-CLEANER AND RUBBER RESTORE TO DO 100 PLUS DECK'S PINCH
ROLLERS, MAIN CAPSTAN BELTS, COUNTER BELTS, REEL HOLD DOWNS IF USED AS WE
HAVE DIRECTED AND THAT'S WHAT WE ARE OFFERING WITH THIS KIT.


THIS IS JUST ONE REPLACEMENT PART OF OVER A THOUSAND WE PRESENTLY HAVE IN
STOCK HERE AT The REEL PRO SOUND Guys STORE
***************************



*ONE 2oz GLASS BOTTLE
OF OUR VERY OWN
FORMULA OF RUBBER
"PRE-CLEANER"

*ONE 2oz GLASS BOTTLE
OF "M G CHEMICALS"
PATENTED "RUBBER
RENUE" TO REJUVENATE
AND CONDITION RUBBER

*ONE STARTER PACKAGE
OF TWO SIDED STANDARD
COTTON SWABS

TWO PIECES OF SUEDE
LEATHER CHAMOIS
*** Money-Back ***
* Full Satisfaction Guarantee *
*FAST PRIORITY MAIL SHIPPING *
POSTED THE SAME WEEK DAY
PAYMENT IS RECEIVED
USA SHIPPING ADDRESS ONLY

WE SHIP WORLD WIDE FOR THE
ACTUAL SHIPPING COST
NEVER ANY PACKAGE FEES,
NEVER!
PINCH ROLLER & BELT RUBBER RESTORE KIT
New Rubber Rejuvenating Kit for your Reel to Reel Deck!
Before
After
After
Before
After
YOU WILL RECEIVE THIS
KIT WITH THE
FOLLOWING ITEMS:
$ 24.95
"Great for cassettes and 8-tracks, too!"